US Consumer Product Safety Commission
Program expanded in January 2017. It is essential to recheck your battery, even if you did so previously and were informed that it was not affected.
If you have already received a replacement battery, you are not affected by this expansion.
In January 2017, in cooperation with various government regulatory agencies, HP announced an expansion of its ongoing worldwide voluntary safety recall and replacement program for certain notebook computer batteries, which was announced in June 2016. The program has been expanded to include additional batteries that were shipped with the same notebook products. These batteries have the potential to overheat, posing a fire and burn hazard to customers.
Because these batteries pose a fire and burn hazard, it is essential to recheck your battery, even if you did so previously and were informed that it was not affected. However if you have already received a replacement battery, you are not affected by this expansion.
The affected batteries were shipped with specific HP, Compaq, HP ProBook, HP ENVY, Compaq Presario, and HP Pavilion Notebook Computers sold worldwide from March 2013 through October 2016, and/or were sold as accessories or spares, or provided as replacements through Support.
Customers should cease use of affected batteries immediately. Customers may continue to use their notebook computer without the battery installed, by connecting the notebook to external power. HP’s primary concern is for the safety of our customers. HP is proactively notifying customers, and will provide a replacement battery for each verified, eligible battery, at no cost. For customers with 10 or more potentially affected batteries, HP has put in place a process to assist with the validation and ordering process. For details please refer to the FAQs tab on this website.
Note: Not all batteries in all HP, Compaq, HP ProBook, HP ENVY, Compaq Presario, and HP Pavilion Notebook Computers are affected.
Option A (Recommended): HP Battery Program Validation Utility will check if the battery in your notebook computer is affected. Validation using the utility generally takes less than 30 seconds. Requires Microsoft .NET 4.5 framework and HP CASL Framework (EXE, (8 MB)) to be installed in order for utility to function.
Option B: Follow the manual validation process to check if your battery is affected.
Applies To Product(s): Select HP Notebooks